Company News

HOW TO WIRE A WATERPROOF CONNECTOR IP68 WEATHERPROOF CONNECTOR

2021-05-14


M684 INSTRUCTIONS

1.Prepare M684 and 2 wires, wires need split 2 inches and remove 1/2 inches jacket.
2.Back out the screws on conductor a little, make the hole enough to plug wire in.
3.Plug the split wire in the connector, screw one side.
4.Plug another side wires, make sure the wires colors are correspondingly, then screw tightly.
5.Connect the conductor with cover.
6.Tighten them.