Waterproof connectors are the main accessories of electronic lighting components. Waterproof connectors are mainly divided into circular waterproof connectors and square waterproof connectors, which are connected by sealing and locking. The connectors have an additional waterproof ring compared to ordinary connectors, and the waterproof levels are mainly IP67 and IP68.
The structure of traditional street lights is very simple, so the wiring method is also very simple, commonly known as "one to the top", which refers to the light source directly connected to the top of the street light from the bottom of the street light after the mains cable passes through the distribution box.
Surge protection device, also known as surge protector, is an indispensable device in the lightning protection of electronic equipment. In the past, it was often referred to as "lightning arrester" or "overvoltage protector", abbreviated as SPD.
The electrical performance problems caused by waterproof connectors to varying degrees during wiring interconnection are usually caused by the following factors:
Firstly, the number of A and A terminals required inside can be determined based on power/voltage=current. Secondly, it is necessary to open several holes to handle the incoming and outgoing lines, with several inputs and outputs required. You should know how many sets of wires to enter and how many sets of wires to exit.
The IP68 waterproof test of Greenway Electronics' waterproof connector is to ensure that it works for 2 weeks at a water depth of 10 meters without water ingress; After being placed in a water depth of 100 meters and subjected to 12 hours of destructive testing, the product's good performance can still be maintained.