As a professional manufacturer of outdoor lighting lightning arresters, Shenzhen Greenway Electronics Co., Ltd. is making continuous progress to enrich and improve its lightning arresters product line. At present, a number of lightning arrester products have successively obtained safety regulation certification. In order to facilitate customers' review and selection, the lightning arrester products of our company are summarized as follows for your reference.
Brief introduction to classification of lightning arrester
In addition to the performance, lightning arrester products can be divided into two commonly used types, namely, 10 kV and 20 kV, and also can be divided into series type and parallel type from the product structure; In addition, it can be distinguished from the appearance:
1. Lightning arrester products can be divided into sleeve type and plastic shell type from the shell;
2. From the aspect of appearance, it can be divided into single side linetype and two side linetype;
3. According to the wire materials used, it can be divided into electronic wire and cable wire;
4. If the lightning arrester does not use wire, PCB circuit board terminal blocks will be reserved on the circuit board of the lightning arrester products in advance for the customer to wire themselves;
Plastic shell lightning arrester products
1. GSPD1 series
(1) GSPD 1:10kv, plastic shell encapsulation type, unilateral outgoing line; Both electronic wires and cable wires can be used; It can be connected in series or in parallel. It has obtained TUV certification from Europe and Germany, ETL certification from America and CQC certification from China;
(2) GSPD 1-20: 20kv, plastic shell encapsulation, unilateral outgoing line; Both electronic wires and cable wires can be used; It can be connected in series or in parallel. It has obtained TUV certification from Europe and Germany, ETL certification from America and CQC certification from China;
2. GSPD 3 series
(1) GSPD 3: 10kv, plastic shell filling type, unilateral outgoing line; Only electronic wires can be used; It can be connected in series or parallel, and has obtained TUV from Europe and Germany, ETL from America and CQC safety certification from China;
(2) GSPD 3-20: 20kv, plastic shell encapsulation type, unilateral outgoing line; Only electronic wires can be used; It can be connected in series or parallel, and has obtained TUV from Europe and Germany, ETL from America and CQC safety certification from China;
3. M997 and GSPD 4 Series
These two products are highly similar, both are 10kV products, both are plastic casings, and neither is encapsulated. At the same time, both use PCB terminals, which are wired by the customer himself. Therefore, these two products are introduced together; The differences between the two products are as follows:
⑴ M997: 10kv, plastic shell, without potting, PCB terminal blocks are installed on both sides; Tandem products have obtained TUV safety certification from Europe and Germany;
(2) GSPD 4: 10kv, plastic shell, no potting, PCB terminal is installed on one side; Parallel type products have obtained TUV safety certification from Europe and Germany;
(3) 
(4) 4. GSPD 5 series
(5) ⑴ GSPD 5: 10kv, plastic shell, no potting, outgoing lines on both sides; Only cable wires can be used; Tandem products have obtained TUV from Europe and Germany, ETL from America and CQC safety certification from China;
(6) ⑵ GSPD 5-20: 20kv, plastic shell, no potting, outgoing lines on both sides; Only cable wires can be used; Tandem products have obtained TUV from Europe and Germany, ETL from America and CQC safety certification from China.
(7) 
